Pressure Sensor M

본문 바로가기
사이트 내 전체검색

Pressure Sensor M

Pressure Sensor M


Pressure Transducer M60-3 with cable and wall mount adapter

Piezoelectric Transducers for High Frequency Measurements

The piezoelectric PVDF Pressure Gauge series M is the state of the art device for measuring high frequency pressure changes with rise times of only a few nanoseconds in gases and liquids. The transducer is based on piezoelectric pvdf. It is recommended for measuring blast waves, shock waves in shock tube experiments or other dynamic pressures. The gauge is nearly free from vibrations.

All sensor elements are protected by an elastic resin for thermal protection.

M60-3

    Application

  • experiments in gas
  • ideal for wall mount in shock tubes (for end wall, M100-1)
  • with KIAG connector
  • excluding separate cable, article 800-200-1
  • dimension identical to Kistler 603B
  • wall mount kit, article-no. 100-290-1
  • charge amplifier Müller MCPA 10 or Kistler necessary
  • Rise time:

    60 ns
  • Sens. diameter:

    3 mm
  • Outer diameter:

    5,5 mm
  • Sensivity:

    4 pC/bar
  • Cable:

    KIAG M4x0.35 sep. 2 m cable
  • Article No.:

    100-200-1

M60-3L

    Application

  • Same sensor as M60-3, but for liquids and ultrasound as well,
  • blast waves in liquids
  • with direct water tight cable
  • head identical to M60-3
  • in case of short pulses direct connection to a recorder with 1 MOhm input recommended
  • in case of longer pressure waves or longer cable extensions charge amplifier MCPA 10 is necessary
  • Rise time:

    60 ns
  • Sens. diameter:

    3 mm
  • Outer diameter:

    5,5 mm
  • Sensivity:

    4 pC/bar
  • Cable:

    incl. 2 m Cable, water tight
  • Article No.:

    100-200-3

M60-1L

    Application

  • experiments in gas
  • ideal for explosion chambers for frontal orientation to shock wave
  • thermal protection lasts for 80 to 100 ms
  • charge amplifier MCPA 10 is recommended
  • wall mount, article 100-290-3
  • excluding cable , article 800-200-1
  • Rise time:

    40 ns
  • Sens. diameter:

    1 mm
  • Outer diameter:

    2,5 mm
  • Sensivity:

    0.4 pC/bar
  • Cable:

    incl. 2 m cable
  • Article No.:

    100-201-1

M60-1L-M3

    Application

  • experiments in gas or liquids
  • with direct water tight cable
  • with a M3 thread for easy and direct mounting in a wall
  • rubber O-ring provides a tight connecting
  • application similar to M60-3L
  • Rise time:

    40 ns
  • Sens. diameter:

    1 mm
  • Outer diameter:

    M3
  • Sensivity:

    0.4 pC/bar
  • Cable:

    incl. 2 m cable
  • Article No.:

    100-201-2

Technical Data

  • Range:

    -20 to 400 bar (-2 to 40 MPa)
  • Rise time:

    40 – 100 ns
  • Bandwidth:

    Up to 15 MHz
  • Sensitivity:

    M60-3: about 0.5 pC/MPa
  • M60-1L-M3:

    about 0.04 pC/MPA
  • Calibration:

    Steady state shock tube calibration up to 1 MPa.
  • Sensitive diameter:

    M60-3/M60-3L: 3,0 mm
  • M60-1-M3/M100-1:

    1,0 mm
  • Polarity:

    negative
  • Capacity:

    About 30 pF
  • Impedance:

    > 1010 Ohm
  • Sensitive element:

    Piezoelectric PVDF
  • Temperature range:

    -20 up to +65°C, shortly higher
  • Housing:

    Stainless steel, sensitive element covered with an elastic epoxy resin
  • Size:

    M60-3/M100-1: 6.3 mm x 12 mm
  • M60-3L:

    6.3 x 28 mm
  • M60-1L-M3:

    M3 x 27 mm
  • Weight:

    M60-3:1.4 g
  • Connector:

    M60-3/M100-1:KIAG M4 x 0.35 pos., cable article no. 800-200-1, M60-3L, M60-1L-M3 types: with a water tight 2 m cable with BNC pos.

Article No.:

  • Article-No.:

    100-200-1 Pressure Transducer M60-3
  • Article-No.:

    100-200-3 Pressure Transducer M60-3L with 2 m water tight cable
  • Article-No.:

    100-200-7 Pressure Transducer M100-1
  • Article-No.:

    100-201-2 Pressure Transducer M60-1L-M3 with M3 thread, 2 m cable, BNC
  • Article-No.:

    100-200-4 Surcharge for a stainless steel closed housing for M60 types
  • Article-No.:

    100-290-1 Wall Mounting Set Delrin, wall thick. 18 mm for M60-3, M60-3L and M100
  • Article-No.:

    100-290-2 Wall Mounting Set Brass, wall thick. 18 mm for M60-3, M60-3L and M100
  • Article-No.:

    100-290-3 Wall Mounting Set Delrin, wall thick. 12 mm for M60-3, M60-3L and M100
  • Article-No.:

    100-290-4 Wall Mounting Set Brass, wall thick. 12 mm for M60-3, M60-3L and M100
  • Article-No.:

    100-290-5 Adapter for M60-3 Wall Mounting Set for M60-1L-M3
  • Article-No.:

    800-200-1 KIAG M 4 connection cable, 2 m for M60-3 and M100-1

The transducer can be delivered in nearly any shape. If you wish a special design, cable length or connector please send us a drawing and request a quotation.

Notice

  • 게시물이 없습니다.

회원로그인

접속자집계

오늘
13
어제
118
최대
1,509
전체
98,105

COMPANY | NOTICE

그누보드5

경기도 하남시 조정대로 150(덕풍동 762번지) 아이테코 오렌지존 1024호 | 전화 : 031) 790-4090 - 1 | 팩스 : 031) 790-4093 | E-mail : jjsys@jungjinsystem.com
Copyright © JUNGJIN. All rights reserved.