Reverse Pitot Static Probes

본문 바로가기
사이트 내 전체검색

Reverse Pitot Static Probes

Reverse Pitot Static Probes

GENERAL INFORMATION


Type "S" and "ST"

Description
The Type "S" (Stauscheibe) or Reverse Pitot-Static probe measures velocity, weight flow rate, and related volumetric quantities of a moving fluid. The probe consists of two stainless steel tubes with impact holes oriented at 180° angles to one another (see Fig. 1). One hole faces upstream for the measurement of total pressure (PT); the other is aligned in a downstream direction for static pressure (PS) measurement. The difference between these two pressures (PT - PS) approximately equals 150% of the velocity pressure (PV) of the fluid. PV approximation must be corrected to true value through proper calibration to the particular flow situation.

Capabilities
United Sensor "S" Probes are designed for easy entry into small holes in stack or flow passage walls, and due to their relatively large impact (sensing) holes, are especially effective in the presence of high concentrations of clogging particulate matter. Large pressure tube diameters permit easy cleaning.

Variations
A wide selection of variations permit custom designing of the "S" Probe to meet exact specifications. These include special constructions for high operating temperature and pressures; longer or shorter probe lengths; larger or smaller diameter tubing; and built-in thermocouples.

  • 게시물이 없습니다.

회원로그인

접속자집계

오늘
83
어제
339
최대
1,509
전체
66,537

COMPANY | NOTICE

그누보드5

경기도 하남시 조정대로 150(덕풍동 762번지) 아이테코 오렌지존 1024호 | 전화 : 031) 790-4090 - 1 | 팩스 : 031) 790-4093
Copyright © JUNGJIN. All rights reserved.


Warning: Unknown: write failed: Disk quota exceeded (122) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/home/hosting_users/annis_casa/www/data/session) in Unknown on line 0