Boost Venturi Probes

본문 바로가기
사이트 내 전체검색

Boost Venturi Probes

Boost Venturi Probes

Boost Venturi Probes are used to amplify the measured velocity pressure in a flowing fluid. The measured total pressure is unchanged from a Pitot-Static reading but the flow is accelerated in the venturi passages, as in a flow nozzle, so the static pressure reading is lower than that obtained with a Pitot-Static probe.

The magnitude of the boost or gain is defined as: (PT2 - PS2)/(PT1-PS1) where PT2, PS2 are total and static pressures measured by the probe and PT1, PS1 are free stream values as measured by a conventional Pitot-Static probe. The standard Boost Venturi probes (Types A and B) provide approximate gain figures of 10 and 4.

By amplifying the velocity pressure difference (PT - PS) with a Boost Venturi, a more accurate measurement can be made of this difference. This increase in accuracy will be achieved, however, only if the probe's gain is accurately known, and this may require that the probe be calibrated under actual flow conditions.

When used for monitoring a fixed flow, a Boost Venturi gives a lower permanent pressure drop than an orifice. These probes may also be used with a differential pressure controller to perform flow control and / or limit functions.

TYPE VA
Large outer venturi encompassing smaller inside venturi for maximum gain of 9 plus. [view dimensions]

TYPE VB
Smaller more compact venturi for maximum gain of 3 plus. [view dimensions]

Notice

  • 게시물이 없습니다.

회원로그인

접속자집계

오늘
106
어제
118
최대
1,509
전체
105,183

COMPANY | NOTICE

그누보드5

경기도 하남시 조정대로 150(덕풍동 762번지) 아이테코 오렌지존 1024호 | 전화 : 031) 790-4090 - 1 | 팩스 : 031) 790-4093 | E-mail : jjsys@jungjinsystem.com
Copyright © JUNGJIN. All rights reserved.