- Embedded EEPROM-based Calibration Data
- Digital Sensor Compensation
- Up to ±0.05% FS Static Accuracy
- Up to ±0.005%/ºC Thermal Stability
- Pressure ranges: 0-5 psi (34 kPa) to 0-10000 psi (69 Mpa)
- Welded 316 SS Construction
- Turbomachinery Test Stands
- Process Control
- Environmental Monitoring
- Hydraulic/Pneumatic Systems
Series 9400 are highly accurate, digitally compensated
pressure transducers designed specifically for use with
PSI’s 9022 All-Media Intelligent Pressure Scanners in
applications requiring compatibility with liquid and highpressure
media. The 9400 utilizes a highly accurate
pressure sensor assembly specifically designed for
hostile fluids and gases. The assembly is integrated with
supporting electronics in a durable waterproof housing
constructed of 316 SS. Standard pressure ranges are
available from 0-5 to 0-10,000 psi in gage, absolute and
differential reference pressure formats.
Series 9400 transducers achieve high accuracy and thermal stability through the use of digital compensation technology to correct zero, span, and linearity errors over the operating pressure and temperature range. Each digitally compensated transducer contains an integral serial EEPROM storing factory generated calibration data. This data is uploaded into the Model 9022 Intelligent Pressure Scanners upon power-up and used to compensate for the inherent transducer errors during use. Static accuracy of up to ±0.05% FS with thermal stability up to ±0.005%/ºC are achieved using this technique. The Model 9022 scanners support output pressure measurements from the 9400 transducers in engineering units over an Ethernet interface using TCP or UDP protocols.
The Series 9400 All-Media Pressure Transducer is one component of the NetScanner™ System. Multiple NetScanner components measuring a variety of parameters and sharing the same command set can be networked to form a distributed intelligent data acquisition system.