CCD CAMERAS

본문 바로가기
사이트 내 전체검색

CCD CAMERAS

CCD CAMERAS

Color CCD Camera

Product ID: PSP-CCD-C
The PSP-CCD-C is a 2-megapixel CCD color camera designed to operate within a PSP system. The camera is small and lightweight at 210g allowing for an array of cameras to be mounted in a tight place for larger scale models and applications. The PSP-CCD-C is used in Binary PSP and particle shadow velocimetry. One approach that allows binary pressure sensitive paint data to be acquired using a single camera involves the use of a color camera. Rather than use optical filters in front of the camera lens, the filtering is applied on the chip using a standard Bayer filter. In the case of BinaryFIB™, the pressure-sensitive signal is acquired on the red pixels and the reference signal is acquired on the green pixels. All images are acquired through a single camera and lens minimizing image alignment errors. This single chip system also accomplishes a second goal; all data is acquired simultaneously, and thus the stability of the illumination source is a less significant issue. The major drawback of this approach is the loss of spatial resolution. In a color chip, only ¼ of the pixels are sensitive to the signal channel (red pixels) on the standard Bayer filter. Despite the loss of spatial resolution, the color camera approach produces excellent results at low speeds. The normal frame rate is 35 fps but can operate at 44 fps in overclock mode. The camera features a software trigger and external TTL trigger over BNC. The camera is compatible with Windows 7, Vista and XP both 32- and 64-bit.

SPECIFICATIONS

Sensor
Resolution 1600 x 1200 (active)
Type KAI-2020 CCD
Format 11.89 mm (H) x 8.94 mm (V), 14.8 mm diagonal (1” optical format)
Pixel Size 7.4 μm
Frame Rate 35 fps (40 MHz) Standard clock
44 fps (50 MHz) Overclocked
Electron Full Well Capacity 40,000 e−
Readout Noise 20 electrons
Dynamic Range 60dB
Output Format(s) 8, 12, 14-bit (single AD only)
Binning H/L 1x, 2x, 3x, 4x, 8x
Interframe Transfer Time 200 ns
Maximum Exposure 16 seconds
Trigger
Inputs External (TTL via IN1/IN2), software, computer
Options Level, edge, pulse width, internal exposure
Modes Free-run, standard, double, frame accumulation
Strobe Output Programmable position and duration
Communication
Interface GigE
On Board Memory None
Software Interface ProAcquire
Lens Control Available in ProAcquire (LC-2 integration)
Environmental
Vibration/Shock 100g
Operating Temperature Range -40˚C to 85˚C
Humidity 10% to 90% non-condensing
Size & Weight
Size 46 mm (L) x 46 mm (H), 68.6 mm (L)
Operating Temperature Range -40˚C to 85˚C
Humidity 10% to 90% non-condensing
Weight 219 grams
Lens Mount c-mount
Power Requirements
External Power Input 12V2A
Power Consumption 4.8 W
Export
ECCN EAR99


PSP-CCD-C Dimensions

Monochrome CCD Camera

Product ID: PSP-CCD-M
The PSP-CCD-M is a 2-megapixel, c-mount, monochrome CCD camera designed to operate with single luminophore PSPs and TSPs. The camera is small and lightweight, allowing for an array of cameras to be mounted in small places for larger scale models and applications. The monchrome camera takes advantage of the full resolution of the array as all pixels act as pressure sensors.

The camera communicates over a Gigabit Ethernet connection with the acquisition computer. The camera has no on-board memory so data is streamed directly to the hard drive. The normal frame rate is 35 fps but can operate at 44 fps in overclock mode. The camera features a software trigger and external TTL trigger over BNC.

SPECIFICATIONS

Sensor
Resolution 1600 x 1200 (active)
Type KAI-2020 CCD
Format 11.89 mm (H) x 8.94 mm (V), 14.8 mm diagonal (1” optical format)
Pixel Size 7.4 μm
Frame Rate 35 fps (40 MHz) Standard clock
44 fps (50 MHz) Overclocked
Electron Full Well Capacity 40,000 e−
Readout Noise 20 electrons
Dynamic Range 60dB
Output Format(s) 8, 12, 14-bit (single AD only)
Binning H/L 1x, 2x, 3x, 4x, 8x
Interframe Transfer Time 200 ns
Maximum Exposure 16 seconds
Trigger
Inputs External (TTL via IN1/IN2), software, computer
Options Level, edge, pulse width, internal exposure
Modes Free-run, standard, double, frame accumulation
Strobe Output Programmable position and duration
Communication
Interface GigE
On Board Memory None
Software Interface ProAcquire
Lens Control Available in ProAcquire (LC-2 integration)
Environmental
Vibration/Shock 100g
Operating Temperature Range -40˚C to 85˚C
Humidity 10% to 90% non-condensing
Size & Weight
Size 46 mm (L) x 46 mm (H), 68.6 mm (L)
Operating Temperature Range -40˚C to 85˚C
Humidity 10% to 90% non-condensing
Weight 219 grams
Lens Mount c-mount
Power Requirements
External Power Input 12V2A
Power Consumption 4.8 W
Export
ECCN EAR99


PSP-CCD-M Dimensions

Notice

  • 게시물이 없습니다.

회원로그인

접속자집계

오늘
19
어제
118
최대
1,509
전체
98,111

COMPANY | NOTICE

그누보드5

경기도 하남시 조정대로 150(덕풍동 762번지) 아이테코 오렌지존 1024호 | 전화 : 031) 790-4090 - 1 | 팩스 : 031) 790-4093 | E-mail : jjsys@jungjinsystem.com
Copyright © JUNGJIN. All rights reserved.